Today, our company specially invited Mr. Zhang, an engineer with nearly 10 years of floor installation experience, to share the process of SPC floor installation.
At the sharing meeting, Mr. Zhang first pointed out that the SPC lock floor can be completely free of nails, glue and joists during the paving process, and can be directly laid on the floor on the ground. Because the lock floor is easy to install without glue, it is easy to disassemble and can be reused. It is especially suitable for exhibitions and home pavement. Generally, the SPC lock floor can be used again when moving at home.
Immediately afterwards, Mr. Zhang began to explain the entire installation process and details.
First of all, clean the basic floor to ensure that there are not many sand particles on the ground, so as not to affect various minor problems in the later use of the floor. After the ground is cleaned, spread moisture-proof cotton. Because the lock floor already has a moisture-proof effect, the reason for laying moisture-proof cotton is to separate the ground from the lock floor, so as to prevent some fine sand on the ground from being cleaned, and there will be "squeak" sanding when walking Granular sound; After choosing the paving method, start laying from a right-angled wall. After the buckles are aligned, the buckles are inserted at a 45-degree angle, and there is no need to build a wooden frame for laying the floor; it can be laid directly. Herringbone paving is not very suitable for level lock floors due to the presence of locks around the floor.
If you need to install the baseboard after finishing the SPC lock floor, you can install the baseboard directly. If there is no skirting line installed, directly apply glass glue to close the edge. By the wall, use glass glue between the SPC lock floor and the wall, so that it will look more beautiful.
Finally, Mr. Zhang pointed out that SPC lock floor is mainly suitable for all kinds of commercial and residential buildings. office. shopping mall. Hospitals, hotels, schools, supermarkets, factories, libraries. Hotels, residential buildings, car showrooms, airports and other places. Some special occasions, such as pharmaceutical factories, electronic assembly workshops, hospitals, etc., have special anti-static and anti-skid series. For places with floor heating facilities, the floor heat temperature can only be used at 17-37°C, otherwise it will cause large deformation and shrinkage.
Friends, is it very simple and practical? Hurry up and learn how to DIY your own floor, spring is here, let’s change the color of your own floor, let’s have some spring. 
Inspected Vinyl Floor Delivery to Kuwait | HAODIBAN
Complete DIY Guide for LVP Flooring Repair
HAODIBAN Demonstrates Reliable Delivery Capabilities
New Product Recommendation: Bamboo Charcoal Wall Panels
