Inspected Vinyl Floor Delivery to Kuwait | HAODIBAN
Complete DIY Guide for LVP Flooring Repair
HAODIBAN Demonstrates Reliable Delivery Capabilities
New Product Recommendation: Bamboo Charcoal Wall Panels
How to install the baseboard? There are differences in the installation of baseboards of different materials. This article takes SPC/WPC baseboard as an example to see how to install the baseboard.
The baseboard can be regarded as the contour line of the ground to some extent, it is located at the junction of the wall and the floor. Generally, there may be cracks on the wall and the ground, and there may be many wires passing through the interface. At this time, baseboard can be used to cover the cracks and wires, which will play a certain role in the overall aesthetic effect.
☀Prepare materials before installation: baseboard, glue, saw, hammer, etc.
The length of the baseboard required for each area may be different, so use a ruler to measure the length of the corner where the baseboard needs to be installed, and then mark the corresponding length on the baseboard.
❷ Cut before installation
Before installation, use a cutting tool to cut the baseboard to the required length.
The baseboard is generally installed after the construction of the ground and walls is completed. Before installing the baseboard, generally the floor has reserved a position for the baseboard. Before installing the baseboard, remove the small wooden blocks in the reserved position, and then insert the baseboard into the reserved seam. Although the baseboard is stuck at the seam, steps need to be taken to make it stronger. Glue the baseboard to the wall
❹ Splicing baseboard (depending on the situation)
▶Alignment stitching
Align and splice the neatly cut ends.
Cut the baseboard vertically at a 45-degree angle and then splicing it to form a sun angle.
▶Internal corner splicing
Cut the baseboard upright at a 135-degree angle and splicing it to form an inner corner.
▶Stairs at right angles
Lay the baseboard flat and cut it at a 45-degree angle, then splice it vertically and horizontally.
Lay the baseboard horizontally and cut it at a 45-degree angle, then splice it vertically and horizontally, and then align it with mold intersection.
After installation, check whether the baseboard is firm. If there is any looseness, you can use nail-free glue and a hammer to fix it again.
The above is how to install the baseboard, taking the SPC/WPC baseboard as an example. I hope it will help you who are confused about the installation of the baseboard.
